Leupold Scopes in H-Series Burnt Bronze Cerakote

11/4/2017

Ok, we're kinda proud of ourselves on these. We've developed a process to Cerakote scopes with the heat-cured H Series formula, even high end ones like the Leupold VX-6HD with Firedot in the back here.

NOTICE ON CERAKOTED SCOPES:
DUE TO HIGH DEMAND, TURNAROUND TIME IS NOW 6 WEEKS.
Sorry guys, no rush service is available.

This batch just left for a large Michigan retailer, who is making Browning XBolt Pro packages as seen at SHOT Show 2017. (And honestly, we're a little disappointed that whoever did Browning's didn't coat the screws on the mounting rings. But we digress....)

Our first challenge was the numbers on the power dial, and the line they meet for adjusting on the eyepiece itself. They are laser etched, and would be very faint after coating. Solution: We hand engraved the numbers and lines/arrows.

After engraving, the scope is carefully prepared to protect the signature gold ring and optics. We do our thing, and viola, one Burnt Bronze scope is born. Rinse, Repeat.

We're really pleased with how these have come out finished, and are looking forward to our next adventure!

Shown above: Leupold VX-6HD with Firedot.

38 Comments

Thomas

1/18/2018 02:54:31 pm

Can the Browning X-Bolt Pro Long Range be chambered in 338 Lapua Magnum?

Also, can it be fitted with an octagon barrel? I know the stock would have to be modified.

Tom

2/12/2018 06:23:16 am

What are your prices to cerakote a scope,rings and base I have?

Paula Downs Gibbs

2/12/2018 06:49:56 am

Hi Tom! The cost to Cerakote is $65. Most scopes also need to have the eyepiece rings engraved so the numbers/markings remain visible. The cost for that is $25. We can alternatively tape that off and leave it black if you prefer. Thanks for the inquiry:)

Randy Roberts

7/10/2018 08:59:23 pm

I’ve got a Leupold vari lll, rings and bases I’d like done in burnt bronze for my Browning Hell’s Canyon.

7/11/2018 12:25:06 pm

Hi Randy. Sure thing, send it on in. Instructions are on our Out of Town Customers page in the Cerakote menu. Give us a call during open hours or email us if you have any questions. Thanks, Paula

Richard A Larrabee link

11/25/2018 11:18:31 am

I am wanting to have scope base and rings cerekote bronze.

Dean Lemay

3/18/2018 08:42:08 pm

I am buying a hells canyon speed and would like a scope with the same coating. Do you sell them? How much are they? Do you do all brands or just luepold?

3/19/2018 12:30:18 pm

We Cerakote scopes to order, and do not keep coated ones in stock since there such a wide range of them. We can certainly quite you on any scope you have in mind, and most brands. We have so far worked on Leupold, Nikon and Swarovski scopes, but I think we can do any brand. Feel free to call during business hours, ur shoot us an email to service@GibbsGuns.com for more detailed info. Thanks for asking!

Kevin Lepage

4/2/2018 06:43:50 pm

Hello
I am looking for a bronzed scope or to get my scope bronzed to go on my hells canyon xbolt - what options do you have?

Paula Downs Gibbs link

4/3/2018 03:33:52 am

Hi Kevin,

We currently have a couple Leupolds in stock, and we can order in just about anything. If you purchase the scope through us, we are able to offer a discount on the Cerakote. Please email us directly with what you have in mind to service@gibbsguns.com , or give us a call at 815-349-4863. Thanks! Paula

Jason

4/6/2018 06:00:03 pm

Will Cerakote a Leupold scope void the lifetime warranty from Leupold

4/6/2018 08:16:37 pm

We are not associated with Leupold and cannot speak for them, however, they have told me by phone that Cerakote does not void the warranty. They can be reached at 1-800-LEUPOLD if you have further questions.

Levi Patterson link

5/7/2018 01:30:00 pm

I just received my cerakoted Leupold scope to match my hells canyon 300. wm and boy does it look awesome on the rifle. Gibbs done a great job on the cerakote job, it looks great. I would recommend anyone who is looking for a good cerakote job to check these guys out. Great service and very friendly. Thanks guys!!!!

Cody

12/29/2018 09:49:37 pm

What scope do you have? I am working hard to find a great scope for my hells canyon 300wm.

Michael Curtright

12/30/2018 09:43:19 am

I haven't purchased one for my 6.5 heels canyon. Looking at Virtex Viper. Vortex said if I cerakote to put the rings on before coating as they indicated rings would not fit correctly after coating. I have never heard of this before.

Paula

5/7/2018 07:12:17 pm

So glad to hear that Levi! And thanks for posting!

Paula

Abram

8/1/2018 02:49:35 pm

Amazing work, and thanks sharing this information. Quick question, if I send in my Leupold VX-6HD to have it match the barrel of my Hells Cayon XBolt, is it possible to have my rugged ridge extreme bipod and picatinny rail mount coated with Cerakote to match the stock, and if not possible for the stock, to have it matched to the scoop / barrel (burnt copper)?

Steve Lowery

8/18/2018 02:58:58 pm

What kind of turnaround time for a scope sent from out of town?

8/18/2018 04:12:43 pm

Hi Steve. Turnaround time is 3-4 weeks. Thanks for asking!

Tom Houston link

9/11/2018 03:24:20 pm

Does getting the Leupolds cerakoted do anything to the lifetime manufacturers warranty?

9/11/2018 04:48:11 pm

We cannot speak for Leupold, but they have told us it does not as long as it is not damaged in coating. Call 1-800-leupold for confirmation from the manufacturer. Thanks!

Jay

10/3/2018 10:21:13 pm

Hi,
Will you coat and ship scopes to Canada?

Thanks Jay

Paula Gibbs

1/10/2019 08:10:45 am

Jay, missed this somehow. We do have a place that will import them into Canada on a per piece basis. There are additional costs and time associated with it. Please calk or email for full details. Thanks for the inquiry!

Tara

11/19/2018 12:04:43 pm

Hello how do I place an order? Is it possible to get the scope prior to Christmas? Please advise.

Roger Harding

11/28/2018 04:01:27 pm

Leupold has custom colors available in dark earth and covert brown, do either of those colors match the burnt bronze on the Hells Canyon? I've aske Leuold and they said ask Browning, Browning said ask Leupold. So I just found your website and I'm guessing that if they matched there wouldn't be much to talk about here.

1/10/2019 07:47:48 am

Somwhow my notificatoons were turned off, sorry for the delayed reply. The color is Burnt Bronze. I don't know if Leupold offers it. Thanks!

Walter Stubblefield

12/26/2018 07:36:02 pm

Looking to purchase a scope for my new Browning Hells Canyon and one of the option that I am looking at is the ATN day/night scope with attached range finder and was wandering if that was an option to cerakote to match the gun?
Thank you
Walter

1/10/2019 07:54:47 am

Sorry somehow my notifications were turned off. We have done many brands of optics, and I'm sure we can do that too. It looks like there is a lot going on with it, so we couldn't tell you until we see it exactly what will be taped off and what can be coated. It may also carry a small upcharge for additional prep work. Thanks for the inquiry!

Dean tompkins

12/26/2018 11:57:11 pm

How much is a Leupold vex-3 3.5-10x40 duplex and mounts, rings to fit. Browning x-bolt 308 hell’s canyon finish.

1/10/2019 07:58:00 am

Dean, apologies for delay in reply, somehow my notifications were turned off. If we haven't spoken already, please give a call or shoot us an email for pricing. Prices change regularly, and it would be inappropriate to quote in this space. Thanks for the inquiry!

Mike Curtright

12/28/2018 06:25:22 pm

Vortex told me if I have Viper HS cerakoted to match my zbrowning he'll canyon that I must leave the rings on the scope as the coating will make it so the rings won't fit.

1/10/2019 08:08:29 am

Mike, I have heard this question a few times now, and I am not really sure where it comes from. We have coated hundreds of scopes, most Leupold, but many others including Vortex. We have never heard of this issue from anyone, and we have mounted many of them ourselves with no difficulty. Cerakote was specifically designed to be at least as durable as powder coating while remaining ultra thin for firearms and their tight tolerances. I will check back with our Vortex customers and try Vortex themselves to see if I can find out more, but as far as we know, this is not an issue.

1/13/2019 01:54:45 pm

I checked with vortex who told me the same thing, but had no real information on actual issues. I'll update again after I've heard back from our Vortex customers.
Paula

Sam Anton

1/9/2019 01:34:08 pm

I have 3 CDS dials for my leupold scope and was looking to send my scope and mounts in to get coated, can you guys coat the cds dials and retain all the info on them?

1/10/2019 07:45:21 am

Sam, we are happy to do the CDS dials. We tape off the number dial so that remains black with white markings. Basically we are Cerakoting the top. Hope that helps!

1/13/2019 05:15:10 pm

So does the information on the top of the dial get covered up or do you leave the top and the bottoms ring black?

Rich Hess

1/13/2019 09:35:04 am

can you Ceracote a Vortex crossfire 2 scope to match a Browning Heel Canyon rifle?

1/13/2019 01:52:02 pm

Hi Rich. Sure can. We're working at getting pics together of brands other than Leupold and will post them on the site soon. Thanks for the comment!
Paula

Brag & Swag